Description for Custom Dynamics SMART Triple Play Brake / Running Light and Turn Signal Conversion Kit • This module triples your visibility in the rear • Converts Rear Turn Signals to Run-Brake-Turn • Works with LEDs or Incandescent Bulbs • Choice of 10 User Selectable Built In Brake Light Strobe/Flash Patterns (User can also select no Strobe/Flash on Brake) Pattern 0: Four Flashes then Solid (Incandescent or LED) Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED) Pattern 2: Seven Flashes then Solid (Incandescent or LED) Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED) Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only) Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only) Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid (LED Only) Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only) Pattern 8: Max Strobe 4 Seconds, Solid (LED Only) Pattern 9: Constant Max Strobe Pattern (LED Only) • Ability to apply Brake Strobe/Flash Patterns on Center Taillight only, Rear Turns Only, or Rear Turns & Center Taillight • SMART Function – If Brake Strobe/Flash is Turned On, Strobe/Flashing will be paused on Turn Signal if Simultaneous Braking and Turning • 10 User Selectable Running Light Intensities Allow User to Match the Running Light Brightness of Turns to Center Taillight • Built In Short Circuit Protection • Sealed, Weather Tight Case • Slim Line Design: 4.2″ x 1.4″ x 0.6″. • 5-Year manufacturer’s warranty Note: The use of this product requires a Signal Stabilizer or Load Equalizer on some Softail models. Note: If your bike is equipped with an alarm AND a Signal Stabilizer is not used, a Alarm Friendly Load Equalizer is Required. Custom Dynamics recommends the use of a Signal Stabilizer over a Load Equalizer.
Custom Dynamics SMART Triple Play Brake / Running Light and Turn Signal Conversion Kit
$45.00